Here's a common scenario. You've installed some window perf with a laminate overlay. After a week or so your customer calls back because the edges are coming up. You end up calling your vendor and really end up not getting the help you need. So, what do you do?

Let's go through the process of prepping for the installation, and then we'll give you the tips on how to handle peeling. It's really important to make sure that all contaminants are off the window before installation. The common thought is to use Windex or something similar, but not only does Windex not touch silicone, but it actually contains it. Alcohol will not cut through silicone either.

It is actually highly recommended to clean the windows using Soft Scrub, or something similar. Don't waste you time on fancy smells or bleach, as you're just using this to remove silicone from the window. Spread it on a sponge; apply to the window and scrub. After doing this, wash it down with water, and you can finish with isopropyl alcohol to speed the drying process.

After installation, cut the perf back 3/8-inch from the edge of the window and seal it with optically clear tape. It is basically a roll of optically clear overlaminate slit down into thin rolls. It ensures that the edges are not exposed to the elements. You'll notice great success when using this method and the common failures when not.